Technical Data:
Fluid Pressure : Max¡Á1.6MPa£¨232psi£©
Control Pressure£º0.3-0.8MPa£¨43.5-116psi£©
Control Fluid£ºNeutral gas£¬Air
Actuator Size£º27mm£¬32mm£¬40mm£¬50mm£¬63mm£¬80mm£¬100mm£¬125mm
Applicable Fluid£ºWater£¬Alcohol£¬Oil£¬Dye£¬Steam£¬Neutral gas or liquid£¬Organic solvent£¬Acid and lye
Fluid temperature£º-10¡æ-+180¡æ£¬25¡æ-+220¡æ
Ambient temperature£º-10¡æ-+80¡æ
Control Type£ºNormally closed£¬Normally open£¬Double acting
Connection: Threaded(BSP.BSPT,NPT),Welded, Flanged, Tri-clamp
Main Materials £º
Body Material£ºCF8M(SS316),CF8(SS304)
Seals Material£ºPTFE
Actuator Material£ºPPS
Applications:
Beer& Drink Filling Machinery
Textile printing& Dyeing
Gas industry
Pharmacy& Medical Equipment
Chemical industry
Disinfection
Frothing Equipment
Water/sewage Disposal
Advantages:
1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth
2.Super Long Life.
3.Which Help The Stem Adjust And Lubricate Itself Automatically.
BACH Series Air Release Valves are designed to vent entrained air that collects at high points in a pipeline. This valve continuously eliminates air from a system by releasing small quantities of air before large air pockets can occur. In many installations, continuing accumulations of air in the pipeline (lacking air release valves); cause flow capacity to slowly decrease; power consumption slowly increases; un-noticeable at first, until flow drops dramatically, even stopping due to air blocks in the piping.
Applicable Standard:
Design: API 600, BS 1414, ISO 10434, ASME B16.34,DIN 3352, EN 10434
Face to Face Length:ASME B16.10, BS 2080, ISO 5752,DIN 3202, EN 558
Flanged Ends: ASME B16.5, ASME B16.47, BS 1560,DIN 2501, EN 1092
Butt Welding: ASME B16.25,DIN 3239, EN 12627
Wall Thickness: API600, ASME B16.34
Testing: API 598, BS EN 12266, ISO 5208,DIN 3230
Size: 1/2¡±-12¡±, DN15-DN300
Pressure Rating:Class150-Class900,PN16-PN100
Body Material: WCB, CF8, CF8M, CF3, CF3M, WC6, WC9
Temperature:-20¡æ to 600¡æ
Applicable Standard:
Design: API 600, BS 1414, ISO 10434, ASME B16.34,DIN 3352, EN 10434
Face to Face Length:ASME B16.10, BS 2080, ISO 5752,DIN 3202, EN 558
Flanged Ends: ASME B16.5, ASME B16.47, BS 1560,DIN 2501, EN 1092
Butt Welding: ASME B16.25,DIN 3239, EN 12627
Wall Thickness: API600, ASME B16.34
Testing: API 598, BS EN 12266, ISO 5208,DIN 3230
Size: 1/2¡±-16¡±, DN15-DN400
Pressure Rating:Class150-Class300,PN16-PN40
Body Material: HT450, WCB, CF8, CF3
Temperature:-20¡æ to 150¡æ
Applicable Standard:
Design: API 600, BS 1414, ISO 10434, ASME B16.34, DIN 3352,EN 10434
Face to Face Length: ASME B16.10, BS 2080, ISO 5752, DIN 3202,EN 558
Flanged Ends: ASME B16.5, ASME B16.47, BS 1560, DIN 2501, DIN 2501
Butt Welding: ASME B16.25, DIN 3239,EN 12627
Wall Thickness: API600, ASME B16.34
Testing: API 598, BS EN 12266, ISO 5208, DIN 3230
Size: 2¡±-12¡±, DIN50-DN300
Pressure Rating:Class150-Class300, PN10-PN40
Body Material: WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, CN7M
Trim Material: F6a, F304, F304L, F316, F316L, F51, Monel
Temperature:-29¡æ to 350¡æ
Applicable Standards:
Design: ASME B16.34, API 608, BS 5351, EN 12516
Face to face Length: ASME B16.10, EN 558
Flanged End: ASME B16.5, EN 1092
Wall Thickness: ASME B16.34, EN 12516-1
Fire Safe: API F6A, API 607, ISO 10497
Testing: API 598, EN12266-1,2, ISO 15484, API 6D, ISO 5208
Size: 1/2¡±-6¡±, DN15-DN150
Pressure Rating: Class150-Class300, PN16-PN40
Cast Body Material: WCB, CF8, CF8M, CF3, CF3M
Forged Body Material: A105, LF2, F304, F316
Seat: PTFE, RPTFE, TMF1600, PEEK, NYLON, DEVLON, MOLON
Temperature: -60¡æ to 260¡æ
Operation Method: Manual, Worm Gear, Electric Actuator, Pneumatic Actuator
Auto Drain Solenoid Valve
ZCS-722
Normally close,it can be preset open and close time,with hand test button,easy install,small shape,high reliability,design for use with air purifying,air station,water auto-supply and irrigation in general.